共找到 150 條與 校準 相關的標準，共 10 頁
本規范適用于溫度校準儀的校準。溫度校準儀可以配接熱電阻或熱電偶以測量溫度，也可以模擬熱電阻、熱電偶或過程信號的輸出以校準溫度二次儀表。 溫度校準儀（以下簡稱校準儀）可以是多功能校準儀中的一部分
Calibration Specification of Temperature Indicators and Simulators by Electrical Simulation and Measurement
Calibration Specification for Attenuation Calibrators
Calibration method of dynamometer calibration device
Calibration
本規范中規定的校準方法適用于溫度范圍-80 ℃— +1 300 ℃的干體式溫度校準器(以下簡稱干體爐)的校準。校準溫度不應超出干體爐生產廠家給出的溫度范圍
Calibration Guideline of the Temperature Block Calibrators
Calibration, Testing, Verification, Repair, Medical, Certification, Inspection, Blood Transfusion, Pharmaceutical, Reference Material Producers
Guidelines concerning Calibration Intervals and Recalibration
Calibration
本標準規定了示功儀校準裝置的計量特性、校準條件、校準項目和校準方法。 本標準適用于新制造、使用中和維修后的示功儀校準裝置的校準
Calibration method of the calibration device for indicator
本標準規定了井斜儀校準裝置的計量特性、校準條件、校準項目、校準方法、校準結果和校準間隔。 本標準適用于新建立、使用中和修理后的三軸轉臺井斜儀校準裝置的校準，其他類型的井斜儀校準裝置亦可參照使用
Calibration method of inclinometer calibration facility
IPC Standards and Publications are designed to serve the public interest through
Calibration
Calibration method of well inclination instrument calibration device
Provides standard procedures for the calibration of optical fibre chromatic dispersion (CD) test sets
Calibration of fibre optic chromatic dispersion test sets
本文件規定了校準的可追溯性和校準間隔的要求，適用于電氣和電子設備及組件的測試實驗室
Requirements for Traceability of Calibrations and Calibration Intervals
本規范規定了采用電磁激勵原理的高聲壓傳聲器校準器的計量特性、校準條件和校準方法。 本規范適用于采用電磁激勵原理的高聲壓傳聲器校準器(以下簡稱校準器)的校準
Calibration Specification for High Pressure Microphone Calibrators
1.1 Polarimeters and polariscopes used for measuring stress in glass are described in Test Methods F218, C148, and C978. These instruments include
Standard Practices for Verification and Calibration of Polarimeters
