焊接過程中消耗的各類材料總稱，包含母材、填充金屬和保護介質等。用于高壓容器焊接時需符合特定標準，含焊條、焊絲、焊劑等主要品類。
| 標準號 & 類別 | 標準名稱 | 發布 |
|---|---|---|
| AS/NZS 1554.5:2014(R2015) 規范標準 |
結構鋼焊接 承受高疲勞載荷的鋼結構焊接 Structural steel weldingWelding of steel structures subjected to high fatigue loads
|
2015 澳大利亞/新西蘭標準 |
| AS/NZS ISO 14344:2023 規范標準 |
Welding consumables — Procurement of filler materials and fluxes
測試計劃 |
2023-10-20 澳大利亞/新西蘭標準 |
| ASME B16.18-2021 規范標準 |
Cast Copper Alloy Solder Joint Pressure Fittings
|
2022-02-28 美國機械工程師協會 |
| AWS A4.5M/A4.5-2020 試驗標準 |
標準方法用于分類測試焊材在角焊縫中位置承載能力和根部穿透能力 Standard method for classifying and testing welding materials for position load bearing capacity and root penetration in fillet welds
|
2020 美國焊接協會 |
| AWS A5.6/A5.6M-2008(2017) 規范標準 |
Specification for classification of copper and copper alloy welding electrodes
|
2017 美國焊接協會 |
| BS EN 10028-6:2017 試驗 |
用于壓力用途的鋼制扁平產品 可焊接細晶粒鋼 淬火和回火 Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
|
2017-01-01 英國標準學會 |
| BS EN 13479:2017 規范標準 |
焊接耗材 金屬材料熔焊用填充金屬和焊劑通用產品標準 Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
填充材料 焊劑 |
2017-09-19 英國標準學會 |
| BS EN 14532-2:2004(2009) 試驗/規范 |
焊接材料 試驗方法和質量要求 第2部分：鋼、鎳和鎳合金焊接材料的補充方法和合格評定 Welding consumables - Test methods and quality requirements - Part 2 : Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
|
2009-01-01 英國標準學會 |
| BS EN 14700:2014 規范標準 |
Welding consumables. Welding consumables for hard-facing
|
2014-04-30 英國標準學會 |
| BS EN 14700:2022 規范 |
Welding consumables — Welding consumables for hard - facing
|
2022-01-01 英國標準學會 |
| BS EN 1711:2000(2004) 試驗 |
Non - destructive examination of welds — Eddy current examination of welds by complex plane analysis
熱影響區 |
2004-01-01 英國標準學會 |
| BS EN 4632-001:2008 規范 |
航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.一般要求 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - General requirements
可焊性 |
2009-07-31 英國標準學會 |
| BS EN ISO 1071:2015 分類標準 |
焊接耗材 用于鑄鐵熔焊的藥皮焊條、焊絲、焊條和管狀藥芯焊條 分類 Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
鑄鐵 |
2015-12-31 英國標準學會 |
| BS EN ISO 15792-2:2020 試驗 |
焊接耗材 試驗方法 鋼中單次和兩次技術試件和樣品的制備 Welding consumables. Test methods - Preparation of single-run and two-run technique test pieces and specimens in steel
|
2020-09-30 英國標準學會 |
| BS EN ISO 17641-2:2015 試驗 |
金屬材料焊縫的破壞性試驗 焊件的熱裂紋試驗 電弧焊工藝 自我約束測試 Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests
|
2015-11-30 英國標準學會 |
| BS EN ISO 17642-1:2004(2009) 試驗 |
金屬材料焊縫的破壞性試驗 焊件冷裂紋試驗 電弧焊工藝 第1部分：總則 Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1 : General
氫含量 |
2009-01-01 英國標準學會 |
| BS EN ISO 18273:2015 分類標準 |
Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
實心焊絲 焊棒 |
2015-12-31 英國標準學會 |
| BS EN ISO 22826:2021 規范 |
金屬材料焊縫的破壞性試驗 激光和電子束焊接窄接頭的硬度測試（維氏硬度和努氏硬度測試） Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
硬度測試 |
2021-03-31 英國標準學會 |
| BS EN ISO 24373:2018 規范 |
Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
|
2018-09-30 英國標準學會 |
| BS EN ISO 8166:2003 試驗 |
電阻焊.用恒定焊機設定值評定點焊電極使用壽命的規程 Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings
|
2003-06-13 英國標準學會 |
| CB 20110-2014 規范 |
Technical requirements for installation and welding of waterjet inlet grids of naval ships
格柵 |
2014-11-17 行業標準-船舶 |
| DB37/T 3703-2019 規范 |
Welding procedure specification for steel structure of hoisting machinery
焊接工藝規程 |
2019-11-18 山東省地方標準 |
| DIN CEN ISO/TR 20174:2022 |
焊接 材料分組系統 日本材料（ISO/TR 20174:2020） Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020); German version CEN ISO/TR 20174:2020
|
2022-12-01 德國標準化學會 |
| DIN CEN ISO/TR 20174:2022-12 規范/規程 |
焊接 材料分組系統 日本材料 (ISO/TR 20174:2020) Welding material grouping system Japanese materials (ISO/TR 20174:2020)
|
2022-12 德國標準化學會 |
| DIN EN 12952-2 E:2020-03 規范標準 |
水管鍋爐和輔助裝置 第2部分：鍋爐及其配件的受壓元件用材料（草案） Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
壓力部件 水管鍋爐 |
2020-03 德國標準化學會 |
| DIN EN 12952-2:2022 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
制造工藝 壓力容器部件 |
2022-02-01 德國標準化學會 |
| DIN EN 12952-2:2022-02 規范 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12952-2:2021
制造工藝 壓力容器部件 |
2022-02 德國標準化學會 |
| DIN EN 14700 E:2022-01 規范 |
Welding consumables - Welding consumables for hard-facing
|
2022-01 德國標準化學會 |
| DIN EN 14700:2022-01 |
Draft Document - Welding consumables - Welding consumables for hard-facing; German and English version prEN 14700:2021
|
2022-01-01 德國標準化學會 |
| DIN EN 14700:2023-02 規范標準 |
Welding consumables - Welding consumables for hard-facing; German version EN 14700:2022
|
2023-02 德國標準化學會 |
| DIN EN ISO 3581:2022-05 規范 |
Welding consumables – Covered electrodes for manual metal arc welding of stainless and heat-resisting steels – Classification
|
2022-04-15 德國標準化學會 |
| GB 50755-2012 規范 |
Code for construction of steel structures
|
2012-01-21 國家住房和城鄉建設部 |
| GB/T 11038-2009 試驗 |
Welding specification for pressure parts of marine auxiliary boiler and pressure vessel
|
2009-03-09 國家質檢總局 |
| GB/T 16507.2-2022 |
Water-tube boilers—Part 2: Materials
|
2022-03-09 國家質檢總局 |
| GB/T 25774.1-2023 規范 |
焊接材料的檢驗 第1部分： 鋼、鎳及鎳合金熔敷金屬力學性能試樣的制備 Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals
熔敷金屬 |
2023-11-27 國家質檢總局 |
| GB/T 25775-2010 規范 |
焊接材料供貨技術條件 產品類型、尺寸、公差和標志 Technical delivery conditions for welding consumables.Type of product,dimensions,tolerances and markings
焊絲 焊條 |
2010-12-23 國家質檢總局 |
| GB/T 25778-2010 術語 |
Procurement guidelines for welding consumables
藥芯焊絲 |
2010-12-23 國家質檢總局 |
| GB/T 31032-2023 規范/規程 |
Steel pipeline welding and acceptance
|
2023-12-28 國家質檢總局 |
| GB/T 4732.2-2024 規范 |
Analysis and design of pressure vessels Part 2: Materials
|
2024-07-24 國家質檢總局 |
| ISO 15610:2024 規范 |
金屬材料焊接工藝規范和鑒定 基于測試焊接材料的鑒定 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
|
2024-02-05 國際標準化組織 |
| ISO 24373:2018 規范 |
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
|
2018-08-00 國際標準化組織 |
| JB/T 3223-2017 規范 |
Rules of quality management of welding materials
|
2017-11-07 行業標準-機械 |
| JIS E 4047:2008 規范標準 |
Rolling stock -- Body frame -- Design methods for welded joints
|
2008-03-11 日本工業標準調查會 |
| JIS Z 3181:2005 試驗標準 |
Method of fillet weld test for welding consumables
測試板 |
2005-07-20 日本工業標準調查會 |
| JIS Z 3184:2003 試驗標準 |
Method of preparing deposited metal pad and samples for chemical analysis
|
2003-01-20 日本工業標準調查會 |
| JIS Z 3252:2012 規范標準 |
Covered electrodes, solid wires, rods and flux cored wires for cast iron
化學組成 鑄鐵 |
2012-03-21 日本工業標準調查會 |
| NB 20492-2018 規范 |
Storage, drying and use management of welding materials for nuclear power
儲存 |
2018-1-1 行業標準-能源 |
| NB/T 10939-2022 試驗規范 |
Factory acceptance rules for boiler materials
|
2022-05-13 行業標準-能源 |
| NB/T 20492-2018 規范 |
Storage, drying and use management of welding materials for nuclear power
焊條 |
2018-03-22 行業標準-能源 |
| NB/T 47018.1-2017 規范 |
承壓設備用焊接材料訂貨技術條件 第1部分：采購?fù)▌t Technical conditions for ordering welding materials for pressure equipment Part 1: General rules for procurement
承壓設備 |
2017-03-28 行業標準-能源 |
| NB/T 47018.3-2017 規范 |
承壓設備用焊接材料訂貨技術條件 第3部分:氣體保護電弧焊絲和填充絲 Technical permission of welding materials for pressure equipment.Section 3:Steel electrodes and rods for gas shielded arc welding
承壓設備 |
2017-08-01 行業標準-能源 |
| NB/T 47018.4-2017 規范 |
承壓設備用焊接材料訂貨技術條件 第4部分:埋弧焊鋼焊絲和焊劑 Technical permission of welding materials for pressure equipment.Section 4:Electrodes and fluxes for submerged arc welding
埋弧焊 承壓設備 |
2017-08-01 行業標準-能源 |
| NF EN 14700:2022 |
Welding Consumables - Hardfacing Consumables
|
2022-11-30 法國標準化協會 |
| PD CEN ISO/TR 20173:2018 規范 |
Welding. Grouping systems for materials. American materials
|
2020-02-26 英國標準學會 |
| PD ISO/TR 22281:2018 指南標準 |
痕量元素 |
2018-02-21 英國標準學會 |
| PIP RFSA1000-2015 規范標準 |
Refractory Anchor and Accessory Specification
|
2015-10-01 流程工業實踐 |
| SIS-CEN ISO/TR 20172:2021 規范標準 |
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
|
2021 瑞典標準研究所 |
| SS-EN 1090-2:2018+A1:2024 規范標準 |
鋼結構和鋁結構的施工— 第2部分：鋼結構的技術要求 Execution of steel structures and aluminium structures — Part 2: Technical requirements for steel structures
結構鋼 |
2024 瑞典標準研究所 |
| SS-EN 12952-2:2022 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
制造工藝 壓力容器部件 |
2022 瑞典標準研究所 |
| SS-EN 14700:2022 |
Welding consumables - Welding consumables for hard-facing
|
2022 瑞典標準研究所 |
| SS-EN ISO 14344:2024 規范標準 |
焊接消耗品 填充材料和焊劑的采購（ISO 14344:2024 等同采用） Welding consumables — Procurement of filler materials and fluxes (ISO 14344:2024, IDT)
測試計劃 |
2024 瑞典標準研究所 |
| T/CSTM 00836-2022 規范 |
Welding consumables of high-manganese steel for vessels
低溫容器 |
2022-10-21 中國團體標準 |
| T/CWAN 0002-2017 規范 |
Health standard for weld fume in the air of welding shop
焊接煙塵 |
2017-10-01 中國團體標準 |
| T/CWAN 0006-2018 規范 |
Traceability information identification of welding consumables
|
2018-11-13 中國團體標準 |
| T/CWAN 0007-2018 術語 |
Welding terminology- welding consumables
焊絲 焊條 |
2018-11-01 中國團體標準 |
| T/CWAN 0051-2021 規范標準 |
Standard for Qualification of Welding Sales Enginner
焊接設備 |
2021-11-10 中國團體標準 |
| UNE-EN 1011-8:2018 規范標準 |
Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons
熔焊 |
2018-07-18 西班牙標準化協會 |
| UNE-EN 12807:2020 規范 |
液化石油氣設備和配件 用于液化石油氣（LPG）的可運輸可再充裝釬焊鋼瓶 設計和建造 LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
|
2020-02-26 西班牙標準化協會 |
| UNE-EN 12952-2:2022 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
制造工藝 壓力容器部件 |
2022-11-02 西班牙標準化協會 |
| UNI EN 12952-2:2022 |
水管鍋爐及輔助設備 第2部分：鍋爐受壓部件及附件用材料 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
制造工藝 壓力容器部件 |
2022-05-12 意大利統一標準化組織 |
Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證：京ICP證110310號
頁面更新時間: 2025-07-12 06:05